# Boa v0.94 configuration file
# File format has not changed from 0.93
# File format has changed little from 0.92
# version changes are noted in the comments
#
# The Boa configuration file is parsed with a lex/yacc or flex/bison
# generated parser.  If it reports an error, the line number will be
# provided; it should be easy to spot.  The syntax of each of these
# rules is very simple, and they can occur in any order.  Where possible
# these directives mimic those of NCSA httpd 1.3; I saw no reason to 
# introduce gratuitous differences.

# $Id: boa.conf,v 1.2 2001/09/25 03:28:31 jnelson Exp $

# The "ServerRoot" is not in this configuration file.  It can be compiled
# into the server (see defines.h) or specified on the command line with
# the -c option, for example:
#
# boa -c /usr/local/boa


# Port: The port Boa runs on.  The default port for http servers is 80.
# If it is less than 1024, the server must be started as root.

Port 80

# Listen: the Internet address to bind(2) to.  If you leave it out,
# it takes the behavior before 0.93.17.2, which is to bind to all
# addresses (INADDR_ANY).  You only get one "Listen" directive,
# if you want service on multiple IP addresses, you have three choices:
#    1. Run boa without a "Listen" directive
#       a. All addresses are treated the same; makes sense if the addresses
#          are localhost, ppp, and eth0.
#       b. Use the VirtualHost directive below to point requests to different
#          files.  Should be good for a very large number of addresses (web
#          hosting clients).
#    2. Run one copy of boa per IP address, each has its own configuration
#       with a "Listen" directive.  No big deal up to a few tens of addresses.
#       Nice separation between clients.
# The name you provide gets run through inet_aton(3), so you have to use dotted
# quad notation.  This configuration is too important to trust some DNS.

#Listen 192.68.0.5

#  User: The name or UID the server should run as.
# Group: The group name or GID the server should run as.

User nobody
Group nobody

# ServerAdmin: The email address where server problems should be sent.
# Note: this is not currently used, except as an environment variable
# for CGIs.

#ServerAdmin root@localhost

# ErrorLog: The location of the error log file. If this does not start
# with /, it is considered relative to the server root.
# Set to /dev/null if you don't want errors logged.
# If unset, defaults to /dev/stderr

ErrorLog /var/log/boa/error_log
# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
#  is somewhat experimental and might fail under heavy load.
# "Usual libc implementations of printf will stall the whole
#  process if the receiving end of a pipe stops reading."
#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"

# AccessLog: The location of the access log file. If this does not
# start with /, it is considered relative to the server root.
# Comment out or set to /dev/null (less effective) to disable 
# Access logging.

AccessLog /var/log/boa/access_log
# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
#  is somewhat experimental and might fail under heavy load.
# "Usual libc implementations of printf will stall the whole
#  process if the receiving end of a pipe stops reading."
#AccessLog  "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"

# VerboseCGILogs: this is just a logical switch.
#  It simply notes the start and stop times of cgis in the error log
# Comment out to disable.

#VerboseCGILogs

# ServerName: the name of this server that should be sent back to 
# clients if different than that returned by gethostname + gethostbyname 

#ServerName www.your.org.here

# VirtualHost: a logical switch.
# Comment out to disable.
# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
# become /var/www/IP-A.
# Example: http://localhost/ becomes /var/www/127.0.0.1
#
# Not used until version 0.93.17.2.  This "feature" also breaks commonlog
# output rules, it prepends the interface number to each access_log line.
# You are expected to fix that problem with a postprocessing script.

#VirtualHost 

# DocumentRoot: The root directory of the HTML documents.
# Comment out to disable server non user files.

DocumentRoot /home/httpd/html

# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is recieved.

UserDir public_html

# DirectoryIndex: Name of the file to use as a pre-written HTML
# directory index.  Please MAKE AND USE THESE FILES.  On the
# fly creation of directory indexes can be _slow_.
# Comment out to always use DirectoryMaker

DirectoryIndex index.html

# DirectoryMaker: Name of program used to create a directory listing.
# Comment out to disable directory listings.  If both this and
# DirectoryIndex are commented out, accessing a directory will give
# an error (though accessing files in the directory are still ok).

DirectoryMaker /usr/lib/boa/boa_indexer

# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
# has been commented out, the the on-the-fly indexing of Boa can be used
# to generate indexes of directories. Be warned that the output is 
# extremely minimal and can cause delays when slow disks are used.
# Note: The DirectoryCache must be writable by the same user/group that 
# Boa runs as.

# DirectoryCache /var/spool/boa/dircache

# KeepAliveMax: Number of KeepAlive requests to allow per connection
# Comment out, or set to 0 to disable keepalive processing

KeepAliveMax 1000

# KeepAliveTimeout: seconds to wait before keepalive connection times out

KeepAliveTimeout 10

# MimeTypes: This is the file that is used to generate mime type pairs
# and Content-Type fields for boa.
# Set to /dev/null if you do not want to load a mime types file.
# Do *not* comment out (better use AddType!)

MimeTypes /etc/mime.types

# DefaultType: MIME type used if the file extension is unknown, or there
# is no file extension.

DefaultType text/plain

# AddType: adds types without editing mime.types
# Example: AddType type extension [extension ...]

# Uncomment the next line if you want .cgi files to execute from anywhere
#AddType application/x-httpd-cgi cgi

# Redirect, Alias, and ScriptAlias all have the same semantics -- they
# match the beginning of a request and take appropriate action.  Use
# Redirect for other servers, Alias for the same server, and ScriptAlias
# to enable directories for script execution.

# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example: Redirect /bar http://elsewhere/feh/bar

# Aliases: Aliases one path to another.
# Example: Alias /path1/bar /path2/foo

Alias /doc /usr/doc

# ScriptAlias: Maps a virtual path to a directory for serving scripts
# Example: ScriptAlias /htbin/ /www/htbin/

ScriptAlias /cgi-bin/ /home/httpd/cgi-bin/